Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion Groups
General
GeneralCardiologyVisionDentistryPharmacyLaboratoryNutritionAlternative
Diseases and Disorders
AIDSAlzheimer'sArthritisAsthmaCancerBreast CancerDiabetesEpilepsyGlaucomaHepatitisHerpesLupusProstate BPHProstate CancerProstatitisSinusitisTinnitus

Medical Forum / General / Dentistry / March 2008

Tip: Looking for answers? Try searching our database.

Canadian article on dentists and amalgam control

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Mary - 09 Mar 2008 20:30 GMT
http://tinyurl.com/ytxf9y

Signature

Posted via a free Usenet account from http://www.teranews.com

John & Ninetta - 22 Mar 2008 15:48 GMT
In the Province of Ontario , in order to renew your licence every year, you
must sign off as to having an amalgam separator that exceeds the ISO
standard of 95% mercury capture in order to get the licence (most separators
actually exceed this...mine is actually 97 or 98% capture as I recall).  If
you do not place or remove amalgams, then you don't have to have one (like
an orthodontic or oral radiology practice).  This has been in place for over
5 years in Ontario.  There are over 8000 licenced dentists and specialists
in Ontario, which accounts for about 40% of Canada.  Costs about $1K to
install, cartridges about $400 each, and in my office, I need about 2 a
year.  Not all juristictions are on board yet (which the article is
indirectly pointing out), just as not all States are, but all will be soon
or else governments will legislate it.  And who wants the government to get
more involved in our lives?:

http://www.missoulian.com/articles/2008/03/21/news/local/znews01.txt

Better to be proactive.

John
Mark & Steven Bornfeld - 22 Mar 2008 17:54 GMT
> In the Province of Ontario , in order to renew your licence every year, you
> must sign off as to having an amalgam separator that exceeds the ISO
[quoted text clipped - 15 lines]
>
> John

    NY State's requirement goes in this May.  We just had ours installed a
couple of weeks ago.
    Problem is, it's pointed out another problem--if we don't flush through
a high volume of fluid, nothing makes it out the other end.  So we did,
and lots of crap came out.  Doubt very much is amalgam--there are
filters in the units and on the suction lines anyhow.  But I was
startled by how much sludge came out.

Steve

Signature

Mark & Steven Bornfeld DDS
http://www.dentaltwins.com
Brooklyn, NY
718-258-5001

John & Ninetta - 22 Mar 2008 19:51 GMT
>> In the Province of Ontario , in order to renew your licence every year,
>> you must sign off as to having an amalgam separator that exceeds the ISO
[quoted text clipped - 25 lines]
>
> Steve

I noticed the same thing...most of it is organic slime, some of which  used
to get caught in the screen/cup in the suction system....I found that this
screen screen/cup is never full of anything but clear water since the
separator was installed (and cleaning it was probably the most gross job the
assistant had before the installation).

John
Dartos - 24 Mar 2008 15:49 GMT
What type and brand of separator are you using?

D

> I noticed the same thing...most of it is organic slime, some of which  used
> to get caught in the screen/cup in the suction system....I found that this
[quoted text clipped - 3 lines]
>
> John
John & Ninetta - 24 Mar 2008 22:23 GMT
Solmetex Hg5.

www.solmetex.com/dental.html

John

> What type and brand of separator are you using?
>
[quoted text clipped - 7 lines]
>>
>> John

Rate this thread:






 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.