Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion Groups
General
GeneralCardiologyVisionDentistryPharmacyLaboratoryNutritionAlternative
Diseases and Disorders
AIDSAlzheimer'sArthritisAsthmaCancerBreast CancerDiabetesEpilepsyGlaucomaHepatitisHerpesLupusProstate BPHProstate CancerProstatitisSinusitisTinnitus

Medical Forum / General / Dentistry / February 2006

Tip: Looking for answers? Try searching our database.

Dental Council or similar to talk to?

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
jw 1111 - 25 Feb 2006 15:16 GMT
Hi,  live in London U.K.,  and have a further dental appointment sooon and
would like to talk over briefly my imminent treatment with a third party.
Would it be best to contact the General Dental Council or is there another
Dental professional body that would be best to contact that would hear me
out?    thanks
letsconnect - 25 Feb 2006 15:34 GMT
> Hi,  live in London U.K.,  and have a further dental appointment sooon and
> would like to talk over briefly my imminent treatment with a third party.
> Would it be best to contact the General Dental Council or is there another
> Dental professional body that would be best to contact that would hear me
> out?    thanks

What exactly is it that you're looking for? If you let us know, it
would be easier to say who turn to...
jw 1111 - 25 Feb 2006 17:46 GMT
>> Hi,  live in London U.K.,  and have a further dental appointment sooon
>> and
[quoted text clipped - 6 lines]
> What exactly is it that you're looking for? If you let us know, it
> would be easier to say who turn to...

Thanks for your response.  I recently had a very small piece drop off a
ceramic crown.  I went in to the dentist ( i am a national health patient )
and had the sharp edge ground off, and this was all finished in about three
minutes.   However the texture at that place is now very rough, as if that
place is dirty. ( i keep wanting to go and have a good brush at it ).

I have since learn't that it would have been possible to polish the crown
after taking off the rough edge to smooth the surface a bit.  I wanted to
ask somone in a position of authority, if it was reasonable to have expected
this 'smoothing off' with a finer grade?  Or would going back to the dentist
to have this done be seen as an additional luxury, for which i can be
expected to have to pay extra? In other words if they start asking for a lot
more money, I could say I have spoken to such and such and they say I could
have reasonably expected this to have been polished a bit before. Or I would
see this as an 'additional luxury' and pay up more money with a smile. If
having spoken to the Dental Council or an appropriate body they would know
the rules, so to speak, and hence I would be a bit more knowledgeable.
Many thanks for any further advice.
letsconnect - 25 Feb 2006 20:23 GMT
No, the GDC wouldn't be responsible for that. The correct procedure i
to ask your treating dentist if s/he can set it right, if s/he refuse
the next step might be to lodge a complaint with the dental practice
If the dental practice refuses, you could then lodge a complaint wit
the GDC. But your problem seems like a relatively minor issue, and
don't think anyone would be interested
I don't really know what the accepted standard of care would be in th
example you were describing. There's free dental advice to be had (re
standards of care) at www.askthedentist.info.
As Joel mentioned, you can also ask on dental forums for advice.
don't know how easy it would be to fix your problem - might be
doddle, for all I know

jw 1111 Wrote:

> >> Hi,  live in London U.K.,  and have a further dental appointmen
> sooo
[quoted text clipped - 41 lines]
> the rules, so to speak, and hence I would be a bit more knowledgeable
> Many thanks for any further advice

--
letsconnec

'Dental Fear Central - The Forum' (http://tinyurl.com/hbqdt
steve - 26 Feb 2006 09:49 GMT
> No, the GDC wouldn't be responsible for that. The correct procedure is to
> ask your treating dentist if s/he can set it right, if s/he refuses the
[quoted text clipped - 54 lines]
>> the rules, so to speak, and hence I would be a bit more knowledgeable.
>> Many thanks for any further advice.

Yes, sloppy work. You get that with some dentists.
I had a composite that was left jutting out of a canine like some craggy
outcrop. What an incompetant SOB he turned out to be. He gave me two cases
of pulpitis at the same time also.
Joel344 - 25 Feb 2006 19:12 GMT
I would recommend running it past the
Grand Council of Sci.Med.Dentistry panel first.

Joel

jw 1111 Wrote:
> Hi,  live in London U.K.,  and have a further dental appointment sooo
> and
[quoted text clipped - 5 lines]
> me
> out?    thank

--
Joel34
jw 1111 - 26 Feb 2006 15:26 GMT
> I would recommend running it past the
> Grand Council of Sci.Med.Dentistry panel first.
>
> Joel

Thanks for your response.  I recently had a very small piece drop off a
ceramic crown.  I went in to the dentist ( i am a national health patient )
and had the sharp edge ground off, and this was all finished in about three
minutes.   However the texture at that place is now very rough, as if that
place is dirty. ( i keep wanting to go and have a good brush at it ).

I have since learn't that it would have been possible to polish the crown
after taking off the rough edge to smooth the surface a bit.  I wanted to
ask somone in a position of authority, if it was reasonable to have expected
this 'smoothing off' with a finer grade?  Or would going back to the dentist
to have this done be seen as an additional luxury, for which i can be
expected to have to pay extra? In other words if they start asking for a lot
more money, I could say I have spoken to such and such and they say I could
have reasonably expected this to have been polished a bit before. Or I would
see this as an 'additional luxury' and pay up more money with a smile. If
having spoken to the Dental Council or an appropriate body they would know
the rules, so to speak, and hence I would be a bit more knowledgeable.
Many thanks for any further advice.

Rate this thread:






 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.